Swiss Madison Tourner 30 x 19 Single-Basin Undermount Workstation Kitchen Sinks

Swiss Madison Tourner Undermount Kitchen Sink.

Workstation package contents: model-specific evidence

The SM-KU800B specification sheet explicitly lists a strainer with tailpipe, cutting board, colander, dryer rack and bottom grid. These are documented for the Black model, not inferred from styled photos. The same sheet lists Gold and Rose Gold as family finishes, but its included sink is specifically identified as SM-KU800B; the accessory package for SM-KU800G and SM-KU800RG remains unconfirmed.

Shared features

• Undermount Installation: Designed to fit beneath the countertop and cabinetry to provide a seamless look.
• Material: Durable and long-lasting 18 gauge Stainless Steel.
• Drain Location: Rear Center
• Basin Depth: 10 Inches
• R0 Corner Radius: Sharp corners for a sleek modern look.
• Sound Absorbing Pads: Equipped with sound-dampening pads to minimize sink noise and vibration.
• Sloped Drainage: The slightly sloped sink basin allows water to drain easier.
• Cabinet Size: The minimum interior of your cabinet should be 3" wider than the width of your sink.
• Included: Mounting clips and cutout template.
• Drain components require clarification: generic manufacturer copy says a sink drain is sold separately, while the SM-KU800B specification sheet lists a strainer with tailpipe. Confirm which drain assembly/components are supplied for the selected model rather than treating these statements as interchangeable.

Actual model configurations

Only the listed manufacturer model combinations are represented. Compare model-specific function and installation details rather than choosing by finish alone.

Manufacturer resources by model

• Manufacturer document (SM-KU800B)
• Manufacturer document (SM-KU800B)
• Manufacturer document (SM-KU800B)

Verified document contents: SM-KU800B

The model-identified specification sheet describes an 18-gauge stainless-steel undermount workstation sink with an accessory ledge and a 10-inch basin depth. Its included-parts list names: SM-KU800B sink; strainer with tailpipe; cutting board; colander; dryer rack; and bottom grid. This is a statement of the manufacturer document, not confirmation of current supplier stock or every shipment revision.

The generic installation manual lists the sink, cutout template and mounting clips; it is not an exhaustive model-specific accessory packing list. Do not carry the Black model’s accessory list over to Gold or Rose Gold without their model-specific package confirmation. The drain-component wording above remains a manufacturer clarification hold.